
The short answer
You can do a lot to help, but most people cannot clear an established infestation on their own. Washing, bagging and vacuuming keep numbers down. The bugs that hide in seams and joints usually need a professional treatment over two or more visits.
On this page
This post is for anyone wondering whether they can save the cost of a pest controller and deal with bed bugs on their own. The honest answer is that you can do quite a lot, but there is a point where doing it yourself stops being the cheap option.
What you can do on your own
Most people’s first instinct is to strip the bed and start cleaning, and that instinct is a good one. There is plenty you can do yourself that genuinely helps:
- Hot-wash the bedding. Sheets, covers and the clothes kept in that room go through the machine and dryer as hot as their labels allow.
- Bag things up before you carry them through the house, so nothing drops on the way.
- Go slowly with the vacuum. Work along the piping of the mattress, the joints of the frame and the skirting, and empty the bin into a sealed bag outdoors.
- Thin out the clutter. Boxes and piles under the bed give the bugs shelter and slow the technician down.
None of this costs much, and all of it makes a later treatment easier. A firm will usually ask you to do most of it anyway.
Where doing it yourself runs out
The trouble is where bed bugs live. They squeeze into seams, the joints of a bed frame, screw holes, the back of a headboard and the gaps behind skirting boards and sockets. You can wash every sheet in the house and still have bugs in the frame.
That is why even professionals plan for repeat visits. Test Valley Borough Council says on its charges page that bed bug treatments usually need at least two visits, often more, and that success cannot be guaranteed. If trained staff with professional products plan on two or more rounds, a single go with a shop spray is unlikely to finish the job.
The hidden cost of DIY
DIY looks cheap because the products are cheap. But you may find the real cost is time. Each week of trying something new is another week of bites, and another week for the bugs to spread to the next room.
And when the bugs spread, the eventual bill goes up. Councils and private firms both price by the room. Bedford Borough Council charges £193.60 for a home of up to three bedrooms and £21.95 for each bedroom after that. Haringey charges £360 for up to three rooms and £60 for each extra bedroom.
A worked example
Say you find bites in one bedroom of a three-bedroom house. You spend a few weekends on sprays and powders, but by the time you call someone, bites are turning up in a second bedroom and on the sofa.
Under a council fee for up to three bedrooms, the room count may not change the price. With a private firm, though, a one-room job has become a three-room job, with more time for each visit. If heat is suggested at that point, a single room at about £500 to £800 has become a whole-home job at about £1,000 to £1,500.
In other words, the money saved at the start can easily be spent twice over later.
Shop sprays, powders and foggers
It’s worth being careful with the products sold for home use. Foggers and “bug bombs” release a mist that settles on open surfaces, but bed bugs are rarely sitting on open surfaces. Sprays only work where they actually land.
If you have already used something, tell the firm what it was and when. It helps them decide what to do next and avoids treating blind.
When to call someone in
As a rough rule, it is time to get a price if any of these apply:
- Bites keep coming after a couple of weeks of washing and vacuuming.
- More than one room is affected, or the sofa is involved.
- You rent, and the tenancy or the landlord needs a professional treatment on record.
- You live in a flat, where bugs may be moving between homes.
Our bed bug treatment cost calculator shows what spray or heat would typically cost for the rooms involved, alongside two council fees.
Doing both is usually best
The most effective approach tends to be a mix. You do the washing, bagging and clearing; the professional does the treatment that reaches into the frame, the furniture joints and the walls. That way you are not paying a technician to sort laundry, and they are not working around clutter.
If DIY has run its course, get a quote and we will find a local firm to take it from here.